Emax Magnum F4 AIO FPV Full Stack Flight Controller ESC VTX - V2 - Geez Drones

Emax Magnum F4 AIO FPV Full Stack Flight Controller ESC VTX - V2

  • $109.99
  • Save $20


Emax Magnum F4 AIO FPV Full Stack ESC VTX

The Magnum Tower System is the complete solution to building a modular racing drone without all the mess.  Featuring high performance electronics need for your UAV, the Magnum Tower System revolutionizes the way Drones are designed and built.

The 6-in-1 features everything you need, the tower includes an F4 Flight Controller, 30a Bullet ESCs, 200mw VTX, FrSky Receiver, OSD and a Power Distribution Board.  All of this is stacked in an easy to replace tower system in case any of the parts get damaged.

Emax Magnum F4 AIO FC ESC VTX Drone Stack

 

DOWNLOAD MAGNUM F4 MANUAL -->> MANUAL

6 in 1 Main Board

  • Flight controller (OMNIBUSF4 Firmware)
  • STM32F405 MCU
  • MPU6000 accelerometer/gyro (connected via SPI)
  • On-board Betaflight OSD
  • On-board Buzzer
  • Integrated 5V/3A BEC
  • Integrated LC Filter
  • Dedicated PPM/ Sbus receiver input
  • On-board high-capacity 16mb black box flight log recorder
  • 3 UART pads
  • Addressable LED pad

VTX Board

  • Frequency band:5362-5945MHz
  • Channels: 48 (band/channel chart can be found in mannual)
  • Transmit power:Switchable 25/200mw
  • Supply voltage:4.5V-5.5V
  • Antenna port :50Ω ipx ufl connector
  • Antenna: 1pc lightweight 5.8g dipole 100mm whip.  1pc. SMA extension 80mm length

4 in 1 ESC and Current Sensor Board

  • Continuous current 30A and 40A burst per motor
  • Supply voltage 2-4S Lipo
  • Silabs EFM8BB21F16G 50mhz MCU
  • BLHeli_S firmware
  • Supports DSHOT, MULTISHOT,ONESHOT125
  • Top quality MOSFET
  • 3oz high TG PCB board
  • On-board current sensor

Receiver Board

  • Genuine FrSky XM+ receiver
  • D16 Mode
  • 16 channel SBUS
  • RSSI on Channel 15

Magnum F4 Package Includes:

  • 1 x B-017 XT60 female connector
  • 1 x Hot-shrinkable tube Φ4.5*0.2*L20mm red
  • 1 x Hot-shrinkable tube Φ4.5*0.2*L20mm black
  • 1 x Silicon wire 14AWG L=80mm red
  • 1 x Silicon wire 14AWG L=80mm black
  • 1 x Antenna adapter with SMA female connector L=80mm
  • 1 x 5.8G antenna L=100mm
  • 9 x Nylon nuts M3 black
  • 5 x Nylon screws M3x6 black
  • 5 x Nylon posts M3*5+6mm black

We Also Recommend